China Customized Shower and Eyewash Station Manufacturers Suppliers Factory - Good Price

Industrial Emergency Safety Showers & Eyewash Stations | ANSI Z358.1 & EN 15154 Compliant Manufacturer

Direct manufacturer of industrial emergency drench showers, eye/face wash stations, and freeze-protected combination units. Engineered for chemical processing, oil & gas, pharmaceutical, and heavy manufacturing facilities worldwide.

Full ANSI/ISEA Z358.1 & EN 15154-1/2 Compliance

Material Options: SS304, SS316, Hot-Dip Galvanized Steel, Corrosion-Resistant ABS

100% Factory Hydrostatic & Flow Rate Tested Before Shipment

OEM / ODM, Custom Material Specifications, and Private Labeling Supported

Safety Eyewash Stations
Safety eyewash stations are critical emergency equipment designed to flush contaminants from the eyes, preventing permanent injury in industrial, laboratory and medical settings. Constructed with

view more
Emergency Shower and Eye Wash Station
Emergency shower and eyewash stations are widely used in hazardous work areas and laboratories of pharmaceutical, chemical, petrochemical, electronics, and semiconductor companies as emergency rescue

view more

Quick Selection Types

Combination Emergency Shower & Eyewash

Application: High-risk processing areas with dual eye and full-body chemical exposure risks.
Features: Single plumbing point, simultaneous operation, high-visibility push-plate & pull-rod activation.

Wall-Mounted & Pedestal Eyewash / Eye-Face Wash

Application: Laboratories, chemical storage, workshop maintenance bays with localized eye hazards.
Features: Dual aerated spray heads, inline particle strainer, SS304/ABS bowls with flip-top dust covers.

Freeze-Protected & Heated Safety Showers

Application: Outdoor industrial sites, sub-zero climates, and unheated processing facilities.
Features: Self-draining freeze-proof valves, electrical heat tracing, thermal insulation jackets, or heated enclosures.

Portable & Self-Contained Eyewash Units

Application: Temporary worksites, remote field facilities, or locations without continuous water supply.
Features: Gravity-fed flushing, corrosion-proof polyethylene tanks, portable cart options.

Technical Specifications

Parameter	Engineering Specification
Compliance Standards	ANSI/ISEA Z358.1-2014; EN 15154-1:2006; EN 15154-2:2006
Drench Shower Flow Rate	≥ 75.7 L/min (20 GPM) @ 0.2 MPa (2 bar / 30 PSI)
Eyewash Flow Rate	≥ 1.5 L/min (0.4 GPM) @ 0.2 MPa (2 bar / 30 PSI)
Eye/Face Wash Flow Rate	≥ 11.4 L/min (3.0 GPM) @ 0.2 MPa (2 bar / 30 PSI)
Water Supply Inlet	1-1/4" NPT / BSP Female
Drain Connection	1-1/4" NPT / BSP Female
Operating Pressure Range	0.2–0.6 MPa (2.0–6.0 bar)
Water Temperature	16°C–38°C (60°F–100°F) — Tepid Water Supply
Valve Activation	Full-flow, stay-open ball valves; activation time ≤ 1 second
Shower Control	SS304 triangular pull rod for rapid and easy activation
Eyewash Control	High-visibility push plate + foot pedal for hands-free or low-effort operation

Material Selection Guide by Environment

General Industrial & Indoor Laboratory
Recommended Material: SS304 Stainless Steel or High-Impact ABS

Key Advantage: Cost-effective, excellent mechanical strength, smooth cleanable surface.

Corrosive Chemical Processing & Coastal / Offshore Applications
Recommended Material: SS316 Stainless Steel

Key Advantage: Superior resistance to chlorides, acids, process vapors, and pitting corrosion.

Heavy Manufacturing & General Plant Maintenance
Recommended Material: Hot-Dip Galvanized Steel with High-Visibility Epoxy Powder Coating

Key Advantage: Impact-resistant, budget-friendly for large-scale EPC construction projects.

Cold Climate & Extreme Weather Installation
Recommended Material: Heat-Traced / Insulated SS304 / SS316 with Anti-Scald & Anti-Freeze Thermostatic Valves

Key Advantage: Prevents line freezing in winter and protects against over-temperature water in hot climates.

OEM / ODM & Project Support Services

Custom Configurations:

Custom pipe dimensions, inlet/outlet orientations, foot treadle additions, and specialized mounting plates.

Temperature Control Options:

Supply of industrial thermostatic mixing valves (TMVs) and high-capacity water tempering units.

Safety Accessories:

Integrated visual/audible alarms, flow switch signal transmitters, freeze-protection valves, and emergency signage.

Private Labeling & Packaging:

Custom logo laser marking, client-branded nameplates, custom user manuals, and export-grade reinforced packaging.

Technical Documentation Package:

CAD drawings (2D/3D Step files), material test reports (MTRs to EN 10204 3.1), hydro-test certificates, and Certificate of Origin (CO).

Quality Control & Factory Testing

Hydrostatic Pressure & Leak Testing:

100% of valve assemblies and pipe manifolds are pressure-tested up to 0.8 MPa (8 bar) to verify zero seal leakage.

Flow Rate & Stream Pattern Verification:

Flow meters measure exact L/min output at low and high operating pressures to verify compliant flushing spray patterns.

Rapid Activation Test:

Ball valves are cycle-tested to ensure continuous, stay-open operation within 1 second of manual activation.

Material Chemical Composition Verification:

Spectrometer testing is conducted on all stainless steel batches to guarantee genuine SS304/SS316 grade compliance.

FAQ

Q: What international compliance standards and certifications do your emergency showers meet?

A: Our emergency showers and eyewash stations are fully engineered and tested in accordance with ANSI/ISEA Z358.1-2014 and EN 15154-1/2 standards. Every export batch includes complete 3rd-party compliance certificates, factory hydro-test reports, and Material Test Reports (MTR to EN 10204 3.1) for project compliance approval.

Q: How should we choose between SS304 and SS316 stainless steel for our plant application?

A: SS304 Grade: The standard specification for indoor laboratories, general chemical storage, and standard manufacturing workshops.
SS316 Grade: Mandatory for aggressive chemical synthesis plants, offshore platforms, coastal facilities, and environments exposed to high chloride or acidic vapors.
Specialty Options: We also offer high-impact ABS-coated and galvanized steel units for budget-focused EPC construction projects.

Q: What factory inspection and quality control tests are performed before export shipment?

A: 100% Hydrostatic Pressure Test: Valve manifolds and pipe assemblies are pressure-tested at 0.8 MPa (8 bar) to verify zero seal leakage.
Flow Stream Calibration: Spray heads undergo flow rate and spray pattern testing to ensure gentle, aerated flushing that protects delicate eye tissues.
Spectrometer Grade Verification: All raw stainless steel lots undergo optical emission spectrometer analysis to guarantee authentic chemical composition.

Q: What OEM, private labeling, and technical documentation support do you offer for distributors and EPC contractors?

A: OEM Services: Laser-etched stainless steel nameplates, custom color-coded packaging, private label installation manuals, custom inlet/outlet orientations, and integrated remote signaling flow switches.
Project Engineering Documentation: Full submittal packages including 2D CAD dimension drawings, 3D STEP files, Factory Acceptance Test (FAT) certificates, and Certificate of Origin (CO).

Project RFQ & Procurement Checklist

To receive an accurate engineering quotation and datasheet package within 24 hours, please include the following parameters in your inquiry:

Application & Site Environment (e.g., Indoor Lab, Chemical Processing Plant, Outdoor Cold Area)

Equipment Type & Quantity Required (e.g., Combination Shower/Eyewash, Wall-Mounted, Portable)

Material Preference (SS304 / SS316 / Galvanized Steel / ABS)

Site Water Conditions (Available inlet pressure, temperature range, drainage availability)

Certification Requirements (ANSI Z358.1, EN 15154, CE, ISO)

Customization / OEM Requirements (Branding, alarms, heat tracing, specialized packing)

We're well-known as one of the leading shower and eyewash station manufacturers and suppliers in China, featured by quality products and good price. Please rest assured to buy customized shower and eyewash station made in China here from our factory.

Emergency Shower and Eye Wash Station, Safety Eyewash Stations, shower and eyewash station